Atlas UV Water Steriliser Systems

Atlas H Range units use higher power lamps to give a more compact solution at higher flow rates.
Atlas L Range units utilise the latest in low power lamps.

Atlas UV sterilisers are easy to install, operate and maintain. The units are coupled to a superb controller which gives useful information on it's screen.

These are just some of the messages which advise you of the status of your sterilisation system:

     

►The screen shows the number of days until a lamp change is required.
►UV intensity screen displays the level of UV light detected by the sensor. UV intensity can be affected by poor water quality, scaling on the quartz sleeve and/or sensor, lamp failure or lamp expiring.
►Lamp expired screen; the screen will change between the red lamp expired warning and the 'water maybe unsafe for consumption' warning. If you don't replace your UV bulbs the system will progressively become ineffective.

Please note: The 10 Year Guarantee is for the stainless steel reactor only. The controller is guaranteed for 2 Years and the UV lamps should be replaced annually.